Ques: 1 Which of the following statements are correct in respect of ‘Make in India’ initiative?
- It was launched in 2014 to transform India into a global design and manufacturing hub.
- It identified 25 priority sectors for investment and development.
- The initiative is implemented by the Ministry of Commerce and Industry.
Select the answer using the code given below:
a) 1 and 2 only
b) 2 and 3 only
c) 1 and 3 only
d) 1, 2 and 3
प्रश्न:1 ‘मेक इन इंडिया’ पहल के संबंध में निम्नलिखित में से कौन से कथन सही हैं?
- इसे भारत को वैश्विक डिज़ाइन और विनिर्माण केंद्र में बदलने के लिए 2014 में लॉन्च किया गया था।
- इसने निवेश और विकास के लिए 25 प्राथमिकता वाले क्षेत्रों की पहचान की।
- यह पहल वाणिज्य और उद्योग मंत्रालय द्वारा कार्यान्वित की जाती है।
नीचे दिए गए कूट का उपयोग करके उत्तर चुनें:
a) केवल 1 और 2
b) केवल 2 और 3
c) केवल 1 और 3
d) 1, 2 और 3
Ques: 2 Consider the following statements:
Statement 1: State Pollution Control Boards are constituted under the Water (Prevention and Control of Pollution) Act, 1974.
Statement 2: The primary function of SPCBs is to implement the provisions of the Air (Prevention and Control of Pollution) Act, 1981.
Which one of the following is correct in respect of the above statements?
a) Both statement 1 and Statement 2 are correct and statement 2 explains statement 1
b) Both statement 1 and Statement 2 are correct and statement 2 does not explains statement 1
c) Statement 1 is correct, but Statement 2 is incorrect
d) Statement 2 is correct, but Statement 1 is incorrect
प्रश्न: 2 निम्नलिखित कथनों पर विचार कीजिए:
कथन 1: राज्य प्रदूषण नियंत्रण बोर्ड जल (प्रदूषण निवारण एवं नियंत्रण) अधिनियम, 1974 के अंतर्गत गठित किए जाते हैं।
कथन 2: राज्य प्रदूषण नियंत्रण बोर्ड का प्राथमिक कार्य वायु (प्रदूषण निवारण एवं नियंत्रण) अधिनियम, 1981 के प्रावधानों को लागू करना है।
उपरोक्त कथनों के संबंध में निम्नलिखित में से कौन सा सही है?
a) कथन 1 और कथन 2 दोनों सही हैं और कथन 2, कथन 1 की व्याख्या करता है।
b) कथन 1 और कथन 2 दोनों सही हैं और कथन 2, कथन 1 की व्याख्या नहीं करता है।
c) कथन 1 सही है, लेकिन कथन 2 गलत है।
d) कथन 2 सही है, लेकिन कथन 1 गलत है।
Ques: 3 Consider the following statements:
Statement I: The Governor of a State is appointed by the President of India.
Statement II: The Governor holds office during the pleasure of the President.
Statement III: The Governor is directly elected by the people of the State.
Which one of the following is correct in respect of the above statements?
a) Both Statement II and Statement III are correct and both of them explain Statement I
b) Both Statement II and Statement III are correct but only one of them explains Statement I
c) Only one of the Statements II and III is correct and that explains Statement I
d) Neither Statement II nor Statement III is correct
प्रश्न:3 निम्नलिखित कथनों पर विचार कीजिए:
कथन I: किसी राज्य के राज्यपाल की नियुक्ति भारत के राष्ट्रपति द्वारा की जाती है।
कथन II: राज्यपाल राष्ट्रपति की इच्छा पर्यन्त पद धारण करता है।
कथन III: राज्यपाल राज्य की जनता द्वारा प्रत्यक्ष रूप से निर्वाचित होता है।
उपरोक्त कथनों के संबंध में निम्नलिखित में से कौन सा सही है?
a) कथन II और कथन III दोनों सही हैं और दोनों ही कथन I की व्याख्या करते हैं।
b) कथन II और कथन III दोनों सही हैं, लेकिन उनमें से केवल एक ही कथन की व्याख्या करता है।
c) कथन II और III में से केवल एक ही सही है और वह कथन I की व्याख्या करता है।
d) न तो कथन II और न ही कथन III सही है।
Ques: 4 Consider the following with reference to Micro, Small and Medium Enterprises (MSMEs) in India?
- MSMEs are classified based on investment in plant & machinery/equipment and annual turnover.
- The revised definition of MSMEs came into effect in July 2020.
- Both manufacturing and service enterprises are now covered under the same criteria.
How many of the above is/are not correct?
a) Only one
b) Only two
c) All three
d) None
प्रश्न:4 भारत में सूक्ष्म, लघु और मध्यम उद्यमों (MSME) के संदर्भ में निम्नलिखित पर विचार करें?
- MSME को संयंत्र एवं मशीनरी/उपकरणों में निवेश और वार्षिक कारोबार के आधार पर वर्गीकृत किया जाता है।
- MSME की संशोधित परिभाषा जुलाई 2020 में लागू हुई।
- विनिर्माण और सेवा उद्यम दोनों अब समान मानदंडों के अंतर्गत आते हैं।
उपरोक्त में से कितने सही हैं/नहीं हैं?
a) केवल एक
b) केवल दो
c) सभी तीन
d) कोई नहीं
Ques: 5 The Loktak Lake in Manipur is famous for which unique feature?
a) World’s largest mangroves
b) World’s highest altitude saltwater lake
c) Only freshwater dolphin sanctuary
d) Floating islands called “Phumdis”
प्रश्न:5 मणिपुर की लोकतक झील किस अनूठी विशेषता के लिए प्रसिद्ध है?
a) दुनिया के सबसे बड़े मैंग्रोव
b) दुनिया की सबसे ऊँचाई पर स्थित खारे पानी की झील
c) मीठे पानी का एकमात्र डॉल्फ़िन अभयारण्य
d) “फुमदी” नामक तैरते द्वीप
Answer
Answer 1 : d
Explanation:
Statement 1 is correct:
Make in India was launched by the Prime Minister on 25 September 2014.
Objective: encourage manufacturing, boost innovation, and position India as a global hub for design & production.
Statement 2 is correct:
25 key sectors were shortlisted (e.g., Automobiles, Textiles, Aviation, Biotechnology, Defence manufacturing, etc.).
The aim was to channel investments and focus reforms in these sectors.
Statement 3 is correct:
Specifically, it is driven by the Department for Promotion of Industry and Internal Trade (DPIIT), which functions under the Ministry of Commerce & Industry.
Source: The Hindu (Page 8)
उत्तर 1 : d
स्पष्टीकरण:
कथन 1 सही है:
मेक इन इंडिया की शुरुआत प्रधानमंत्री ने 25 सितंबर 2014 को की थी।
उद्देश्य: विनिर्माण को प्रोत्साहित करना, नवाचार को बढ़ावा देना और भारत को डिज़ाइन एवं उत्पादन के लिए एक वैश्विक केंद्र के रूप में स्थापित करना।
कथन 2 सही है:
25 प्रमुख क्षेत्रों (जैसे, ऑटोमोबाइल, कपड़ा, विमानन, जैव प्रौद्योगिकी, रक्षा विनिर्माण, आदि) को चुना गया था।
इसका उद्देश्य इन क्षेत्रों में निवेश को दिशा देना और सुधारों पर ध्यान केंद्रित करना था।
कथन 3 सही है:
विशेष रूप से, यह उद्योग और आंतरिक व्यापार संवर्धन विभाग (DPIIT) द्वारा संचालित है, जो वाणिज्य एवं उद्योग मंत्रालय के अधीन कार्य करता है।
स्रोत: द हिंदू (पृष्ठ 8)
Answer 2 : b
Explanation:
Statement 1 is correct:
The Water Act, 1974 created both the Central Pollution Control Board (CPCB) and the State Pollution Control Boards (SPCBs).
Their original mandate was prevention and control of water pollution.
Statement 2 is incorrect:
When the Air Act, 1981 was enacted, SPCBs (already established under the Water Act) were given additional powers to implement provisions of the Air Act.
So, enforcing the Air Act is indeed a major function, but SPCBs were not originally created for this.
Source: The Hindu (Page 8)
उत्तर 2 : b
स्पष्टीकरण:
कथन 1 सही है:
जल अधिनियम, 1974 ने केंद्रीय प्रदूषण नियंत्रण बोर्ड (CPCB) और राज्य प्रदूषण नियंत्रण बोर्ड (SPCB) दोनों का गठन किया।
उनका मूल कार्य जल प्रदूषण की रोकथाम और नियंत्रण था।
कथन 2 गलत है:
जब वायु अधिनियम, 1981 लागू हुआ, तो SPCB (जो पहले से ही जल अधिनियम के तहत स्थापित थे) को वायु अधिनियम के प्रावधानों को लागू करने के लिए अतिरिक्त शक्तियाँ दी गईं।
अतः, वायु अधिनियम को लागू करना वास्तव में एक प्रमुख कार्य है, लेकिन SPCB मूल रूप से इसके लिए नहीं बनाए गए थे।
स्रोत: द हिंदू (पृष्ठ 8)
Answer 3 : c
Explanation:
Statement 2 is correct:
Article 156(1): The Governor holds office during the pleasure of the President.
This means he can be removed by the President at any time, even before completing his 5-year tenure.
Hence, this statement supports and explains Statement I, because if the President appoints, naturally he also has the power to remove.
Statement 3 is incorrect:
Unlike the Chief Minister (indirectly elected via legislative majority), the Governor is not elected at all; he is appointed by the President.
Source: The Hindu (Page 8)
उत्तर 3 : c
स्पष्टीकरण:
कथन 2 सही है:
अनुच्छेद 156(1): राज्यपाल राष्ट्रपति की इच्छा पर्यन्त पद धारण करता है।
इसका अर्थ है कि राष्ट्रपति उसे किसी भी समय, यहाँ तक कि अपना 5 वर्ष का कार्यकाल पूरा करने से पहले भी, हटा सकते हैं।
अतः, यह कथन कथन 1 का समर्थन और व्याख्या करता है, क्योंकि यदि राष्ट्रपति नियुक्त करता है, तो स्वाभाविक रूप से उसे हटाने का भी अधिकार है।
कथन 3 गलत है:
मुख्यमंत्री (विधायी बहुमत द्वारा अप्रत्यक्ष रूप से निर्वाचित) के विपरीत, राज्यपाल का चुनाव बिल्कुल नहीं होता; उसकी नियुक्ति राष्ट्रपति द्वारा की जाती है।
स्रोत: द हिंदू (पृष्ठ 8)
Answer 4 : d
Explanation:
Statement 1 is incorrect:
Earlier system (pre-2020): MSMEs were classified only on the basis of investment in plant & machinery (for manufacturing) or equipment (for services).
Problem: Many enterprises avoided expansion to remain in the MSME bracket and continue receiving benefits.
Revised system (post-2020): Now classification is based on two criteria together:
Investment in plant & machinery/equipment
Annual turnover
This allows a more accurate reflection of the enterprise’s size.
Statement 2 is correct:
The new definition was announced under the Atmanirbhar Bharat Abhiyan (May 2020).
It was implemented from 1 July 2020.
Purpose: to broaden coverage, encourage growth, and bring both manufacturing & service enterprises under one umbrella.
Statement 3 is correct:
Earlier: There were different limits for manufacturing and services.
Example: For “small enterprises”:
Manufacturing: investment up to ₹5 crore
Services: investment up to ₹2 crore
Now: There is no separate distinction.Both manufacturing and service enterprises are classified using common thresholds (investment + turnover).
This ensures parity and simplifies the system.
Source: The Hindu (Page 8)
उत्तर 4 : d
स्पष्टीकरण:
कथन 1 गलत है:
पूर्व प्रणाली (2020 से पहले): एमएसएमई को केवल संयंत्र एवं मशीनरी (विनिर्माण के लिए) या उपकरण (सेवाओं के लिए) में निवेश के आधार पर वर्गीकृत किया जाता था।
समस्या: कई उद्यम एमएसएमई श्रेणी में बने रहने और लाभ प्राप्त करते रहने के लिए विस्तार से बचते थे।
संशोधित प्रणाली (2020 के बाद): अब वर्गीकरण दो मानदंडों पर आधारित है:
संयंत्र एवं मशीनरी/उपकरण में निवेश
वार्षिक कारोबार
इससे उद्यम के आकार का अधिक सटीक प्रतिबिंब मिलता है।
कथन 2 सही है:
नई परिभाषा की घोषणा आत्मनिर्भर भारत अभियान (मई 2020) के तहत की गई थी।
इसे 1 जुलाई 2020 से लागू किया गया था।
उद्देश्य: कवरेज का विस्तार करना, विकास को प्रोत्साहित करना और विनिर्माण एवं सेवा उद्यमों दोनों को एक छतरी के नीचे लाना।
कथन 3 सही है:
पूर्व: विनिर्माण और सेवाओं के लिए अलग-अलग सीमाएँ थीं।
उदाहरण: “लघु उद्यमों” के लिए:
विनिर्माण: ₹5 करोड़ तक का निवेश
सेवाएँ: ₹2 करोड़ तक का निवेश
अब: कोई अलग भेद नहीं है। विनिर्माण और सेवा दोनों उद्यमों को समान सीमा (निवेश + कारोबार) के आधार पर वर्गीकृत किया जाता है।
इससे समानता सुनिश्चित होती है और व्यवस्था सरल होती है।
स्रोत: द हिंदू (पृष्ठ 8)
Answer 5 : b
Explanation:
Option b is correct:
Loktak Lake is the largest freshwater lake in Northeast India, located in Manipur.
It is famous for its “Phumdis” → heterogeneous masses of soil, vegetation, and organic matter that float on the surface.
The lake also hosts the Keibul Lamjao National Park, the world’s only floating national park, home to the endangered Sangai deer (brow-antlered deer).
Source: The Hindu (Page 1)
उत्तर 5 : b
स्पष्टीकरण:
विकल्प b सही है:
लोकतक झील पूर्वोत्तर भारत की सबसे बड़ी मीठे पानी की झील है, जो मणिपुर में स्थित है।
यह अपनी “फुमदी” के लिए प्रसिद्ध है → सतह पर तैरने वाली मिट्टी, वनस्पति और कार्बनिक पदार्थों के विषम समूह।
इस झील में केइबुल लामजाओ राष्ट्रीय उद्यान भी स्थित है, जो दुनिया का एकमात्र तैरता हुआ राष्ट्रीय उद्यान है और लुप्तप्राय संगाई हिरण (भूरे सींग वाले हिरण) का घर है।
स्रोत: द हिंदू (पृष्ठ 1)